Step-up Boost Power Module High-voltage Generator Converter DC 3v-6v to 400KV
 
Product Information
 
Input voltage: DC 3 V to 6 V
Input current: 2 A- 5 A
High pressure type: the type of pulse current Output voltage: 400000V (Please pay attention to safety)
High pressure discharge distance between: 10 mm – 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring: Red and green power connection
red line:”+” green line “-”
Output : the other side, same colour cable (Do NOT Touch this)
Please notice: the high-voltage module should avoid the use of electricity in high voltage no- load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module.
Work: intermittent use, continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours can easily damaged module, not covered.
 
1x Step-up Module Supplied